Hello! Welcome to the official website of Shanghai Hufeng Machinery Co., Ltd.!

TEL:021-69116633   Email:hufengjixie@163.com

Converge industry wisdom to create quality independently

Integrating product research and development, production, sales, service, and undertaking steel connection and welding projects

HF

Service Hotline

021-69116633

+
  • 2277a0b3-73e6-4c04-849e-11dddebfc284.jpg

Straight thread stripping outer circle chamfering lathe

Category:

Automatic sleeve chamfering Pa Pei


Contact Us
  • Description
  • Use
  • The function and characteristics of the automatic sleeve chamfering and peeling machine:

    DBC-60 automatic sleeve chamfering and peeling machine is mainly used for turning and chamfering the outer circle of fixed-length bar (tube material) below Ф60. This machine is controlled by PLC program and driven by hydraulic pressure. The loading, clamping, cutting, chamfering and unloading of the workpiece are all controlled by the program and completed automatically. Minimize manpower and improve production efficiency.

    This machine has the characteristics of high degree of automation, simple operation, and strong human-computer interaction. The main components are domestic first-class famous brand products, low failure rate, low noise, and stable operation. This machine is widely used in construction sleeves, auto parts and bearing processing industries.

    Native structure:

    It consists of three parts: main engine, hydraulic station and electrical control.

    The working principle of DBC-60 automatic sleeve chamfering and peeling machine:

    1. The fixed-length workpiece is sent to the designated position by the feeding mechanism, the clamping device automatically clamps, and the feeding mechanism returns to the original position.

    2. When the clamping device sends out a signal, the program sends out a processing signal, and the sliding crate drags the tool holder to start the outer round turning process.

    3. After the turning is completed, the program controls the chamfering process.

    4. After the chamfering is completed, the workpiece clamping device is automatically released, the workpiece is unloaded, and a signal is sent to start the next working cycle.

    Maintenance and safety of machine tools:

    1. The bearing box and hydraulic station need to maintain sufficient oil volume, and it is recommended to change it every six months.

    2. The machine tool needs a reliable grounding wire.

    3. It is recommended to use 46# hydraulic oil for hydraulic oil, and the height of the oil should reach 2/3 of the height of the liquid level gauge.

    4. The recommended working pressure of the oil pump is 1-3MP, and the maximum pressure cannot exceed 5MP, otherwise the oil pump may be damaged.

    5. The hydraulic oil must be kept clean, otherwise the hydraulic system cannot work normally.

    6. Keep the photoelectric proximity switch clean to avoid iron filings on the photoelectric proximity switch head, resulting in failure to send out signals.

    7. Before the system is running, be sure to check whether the pressure of the hydraulic station is in the normal position, and the forward and reverse of each motor.

  • Application of DBC-60 automatic sleeve chamfering and skinning machine: It is mainly used for turning and chamfering the outer circle of fixed-length bar (tube material) below Ф60. The automatic sleeve chamfering and skinning machine is widely used in the construction steel bar connection sleeve, auto parts and bearing processing industries.